Megger SR-98 - Page 91

85
Dimensions
Unit Enclosure:
17.75 H x 16.5 W x 15.5 D in.
444 H x 416 W x 387 D mm
Weight:
51.5 lb. (23.4 kg) Cover Lid On
48.8 lb. (22.2 kg) Cover Lid Off
OPTIONS AND ACCESSORIES
Included Accessories
Description Part Number
Line cord, North American (Model SR-98-1/60) (1 ea.)............................................................. 620000
Line cord, Continental Europe (Model SR-98-3/50) (1ea.)........................................................... 50425
Line cord, International (Model SR-98-2/50 ) (1 ea)..................................................................... 51874
Instruction Manual (1 ea).............................................................................................................. 51187
15 A Input Fuse, (for 120 Volt input) (5 ea.) T rated ..................................................................... 963
8 A Input Fuse, (230 Volt input) (5 ea.) T rated ........................................................................... 962
Test Lead, red, 200 cm, use with voltage outputs and timer (3 ea.) CAT II .............................. 684000
Test Lead, black, 200 cm, use with voltage outputs and timer (3 ea.) CAT II ........................... 684001
Lug Adapter, red, 6.2 mm, use with voltage outputs and timer (2 ea.) CAT II ........................... 684002
Lug Adapter, black, 6.2 mm, use with voltage outputs and timer (2 ea.) CAT II ....................... 684003
Lug Adapter, red, 4.1 mm, use with voltage outputs and timer (2 ea.) CAT II ........................... 684004
Lug Adapter, black, 4.1 mm, use with voltage outputs and timer (2 ea.) CAT II ....................... 684005
Alligator Clip, red, use with voltage outputs and timer (1 ea.) CAT II ........................................ 684006
Alligator Clip, black, use with voltage outputs and timer (1 ea.) CAT II ..................................... 684007
Test Leads, red/blk, use with current output (includes spades) (1 pr.) CAT II .............................. 7934
Carry Case, Test Lead .............................................................................................................. 684008
NOTE: SR 98-3/50 comes with line cord and instruction manual only (no test leads)
Optional accessories are:
#4 High Current Test Leads, 5 ft. [1.5 m] (1 pr.),
use when testing molded case breakers ........................................................................................ 2265
SR-98 Software ........................................................................................................................... 750014
For three-phase applications, an optional Phase Angle Meter (PAM) interface cable is required
to interface the SR-98 to Megger Three-Phase Phase Shifters.
Cable, Interface, for Models EPS-1000 and PVS-1000 (1ea......................................................... 51680
Cable, Interface, Master/Slave, for SR-98 to SR-98 (1ea)............................................................. 51679