BR0150GE ZP-BR01E VIDAR
5
1 SAFETY
Always turn the equipment off before connecting.
Always use manufacturer approved and supplied
cable sets.
Always connect protective earth (ground).
Never leave the instrument unattended while it is
turned on.
Use only approved mains detachable cable set with
the instrument. Main supply cables shall be rated
for the maximum current for the equipment and the
cable shall meet the requirements of IEC 60227 or
IEC 60245. Mains supply cables certified or approved
by a recognized testing authority are regarded as
meeting this requirement.
Unplug the instrument from the mains supply when
it is left unattended or not in use.
Do not expose the instrument to rain or moisture.
Refer all servicing to Megger authorized personnel.
If you need to return the instrument, please use
either the original crate or one of equivalent strength
To Next Page
Loading...
