To Next PageTo Next PageWhy is the emergency program active on my Meiko DV 80.2 Dishwasher?
The emergency program on your Meiko Dishwasher may be active, restricting washing, because there is no boiler or tank heating. Check the system to resolve this.
Why does my Meiko DV 80.2 Dishwasher say maintenance required?
The Meiko Dishwasher indicates maintenance is required when the set operating hours or batch number has been reached. To resolve this, inform the service department and perform maintenance. Afterward, reset the maintenance counter.
What to do if Meiko DV 80.2 says refill with salt?
If your Meiko Dishwasher indicates 'Refill with salt', it means there is no brine available. Check the salt supply and ensure there is water in the salt solution reservoir. Also, check if the float switch S5 is working.
What to do if Meiko DV 80.2 Dishwasher shows error in the dosing system ADT?
If you see an error in the ADT dosing system of your Meiko Dishwasher, it indicates that the flow meter is recognizing impulses even when detergent dosing is not in progress. This can happen if the valve of the dosing unit is not closing. In that case, you should check the valve of the dosing unit.
General| Basket size | 500 x 500 mm |
|---|---|
| Delay start | No |
| Child lock | No |
| Drying system | Condensation drying |
| Theoretical basket capacity | 40 baskets/hour |
| Water consumption | 2.6 liters per cycle |
