Why does my Meiko DV 270 B Dishwasher say maintenance is required?
Your Meiko Dishwasher indicates that maintenance is required because the set operating hours (P122) or batch number (P123) has been reached. Inform the service department and perform maintenance. After maintenance, reset the maintenance counter (P124).
What to do if my Meiko Dishwasher hood is not closed?
If the hood of your Meiko Dishwasher is not closed, you should check connection S1, check the microswitch adjustment, change the microswitch or replace a defective I/O circuit board.
What to do if my Meiko Dishwasher asks for factory setting parameter list?
To address the 'Factory setting parameter list' message on your Meiko Dishwasher, switch the power supply ON/OFF within 5 minutes and set parameters back to factory settings. This action will be rejected, and parameters will be retained and Information 123 will disappear.
How to resolve the 'Incorrect password / no authorization' error on my Meiko DV 270 B Dishwasher?
To resolve the 'Incorrect password / no authorization' error on your Meiko Dishwasher, enter the code once again.
Why is the emergency program active on my Meiko Dishwasher?
The emergency program on your Meiko Dishwasher may be active, restricting washing, because there is no boiler or tank heating. Check the system to resolve this.
Outlines the operator's obligations for safe machine operation.
Lists essential checks and procedures for commissioning the appliance.
Covers safety measures, post-repair checks, and environmental regulations.
Outlines the operator's obligations for safe machine operation.
Lists essential checks and procedures for commissioning the appliance.
Covers safety measures, post-repair checks, and environmental regulations.
General| Brand | Meiko |
|---|---|
| Model | DV 270 B |
| Category | Dishwasher |
| Language | English |
To Next Page
