Why does my Meiko FV 70.2 D say maintenance is required?
Your Meiko Dishwasher indicates that maintenance is required because the set operating hours (P122) or batch number (P123) has been reached. Inform the service department and perform maintenance. After maintenance, reset the maintenance counter (P124).
What to do if my Meiko FV 70.2 D Dishwasher hood is not closed?
If the hood of your Meiko Dishwasher is not closed, you should check connection S1, check the microswitch adjustment, change the microswitch or replace a defective I/O circuit board.
What to do if my Meiko Dishwasher asks for factory setting parameter list?
To address the 'Factory setting parameter list' message on your Meiko Dishwasher, switch the power supply ON/OFF within 5 minutes and set parameters back to factory settings. This action will be rejected, and parameters will be retained and Information 123 will disappear.
How to resolve the 'Incorrect password / no authorization' error on my Meiko FV 70.2 D Dishwasher?
To resolve the 'Incorrect password / no authorization' error on your Meiko Dishwasher, enter the code once again.
Why is the emergency program active on my Meiko FV 70.2 D?
The emergency program on your Meiko Dishwasher may be active, restricting washing, because there is no boiler or tank heating. Check the system to resolve this.
Operator's responsibility to ensure safe machine operation and adherence to regulations.
Key safety precautions for operating the machine, including electrical safety and handling hot water.
Guidelines for safe transport, careful handling, unpacking, and correct installation of the machine.
Specifications for electrical connection: voltage, current, cable types, and protective measures.
Specifications for fresh water supply connection: pressure, air gap, and water quality.
Procedure for completely switching off the machine via the on-site power disconnection device.
Safety precautions and steps for initial appliance commissioning by qualified personnel.
How to navigate and use the machine's keyboard for programming and parameter adjustments.
List of configurable parameters, settings, units, defaults, and notes for machine functions.
How to interpret information displays and identify possible causes for machine faults.
List of error codes, descriptions, and potential causes with rectification advice.
Essential safety precautions before and during maintenance or repair work on the machine.
Operator's responsibility to ensure safe machine operation and adherence to regulations.
Key safety precautions for operating the machine, including electrical safety and handling hot water.
Guidelines for safe transport, careful handling, unpacking, and correct installation of the machine.
Specifications for electrical connection: voltage, current, cable types, and protective measures.
Specifications for fresh water supply connection: pressure, air gap, and water quality.
Procedure for completely switching off the machine via the on-site power disconnection device.
Safety precautions and steps for initial appliance commissioning by qualified personnel.
How to navigate and use the machine's keyboard for programming and parameter adjustments.
List of configurable parameters, settings, units, defaults, and notes for machine functions.
How to interpret information displays and identify possible causes for machine faults.
List of error codes, descriptions, and potential causes with rectification advice.
Essential safety precautions before and during maintenance or repair work on the machine.
General| Brand | Meiko |
|---|---|
| Model | FV 70.2 D |
| Category | Dishwasher |
| Language | English |
To Next Page
