Meiko M-iClean Series User Manual

Page 10
SECTION 4 - OPERATION
4.9 Manual Water Change
During regular operation, the M-iClean Filter removes
the majority of food soil particles from the water in the
wash tank. However, liquids can dissolve in the wash
tank, soiling the water and affecting first-time washing
results.
If the wash tank water becomes heavily soiled, it is
possible to manually empty and refill the tank with clean,
fresh water without shutting down the machine.
With the machine turned on, press and hold for
2 seconds, until the display shows the options ACTION
and SHUTDOWN MACHINE?
Press the next to the action symbol on the
display.
At the Action menu, press next to the
or arrows on the display to select MANUAL/
AUTOMATIC WATER CHANGE.
Press the key next to the check mark to
begin the process.
The display will show a rotating wheel to indicate the
machine is working. The caption at the bottom of the
screen will first show SELF CLEANING CYCLE,
followed by FILLING/HEATING.
At the end of the procedure, the display will return to
the Action menu. Press the (back) key to return to
the normal display screen. The machine is now ready
to resume regular operation.
4.8 Low Detergent Indicator
The liquid detergent supply line ends in a detergent
level detection sensor. If the sensor detects a low supply
of detergent in the container, a message will be
displayed to inform the operator.
If the message continues to be displayed after refilling
the detergent container, press the key next to the
check mark to clear the message.
It is normally not necessary to prime the detergent pump
if the container is refilled promptly. However, if the con-
tainer is completely empty, air can enter the detergent
line, affecting the amount of detergent delivered during
the cycle. To prime the pump during operation:
Press and hold for 2 seconds, until the display
provides the options ACTION and SHUTDOWN
MACHINE?
Press the next to the action symbol on the
display.
The initial choice on the Action menu is PRIME
DETERGENT SUPPLY. Press the key next to the
check mark to prime the detergent pump. A timer
will count down the remaining time for the procedure.
At the end of the procedure, the display will return to
the Action menu. Press the (back) key to return to
the normal display screen. The machine is now ready
to resume regular operation.

Meiko M-iClean Series Specifications

General

Model	M-iClean Series
Category	Dishwasher
Manufacturer	Meiko
Energy Efficiency	Varies by model (e.g., M-iClean UM is highly energy-efficient)
Water Consumption	Varies by model and program (e.g., M-iClean UM can use as little as 2.4 liters per cycle)
Noise Level	Varies by model (typically low noise operation)
Features	multiple wash programs
Type	Pass-through dishwasher, undercounter dishwasher (depending on the model)
Energy Efficiency Class	Varies by model
Number of Programs	Varies by model (multiple wash programs)
Delay Start	No
Child Lock	No
Drying System	AirConcept (Heat recovery system, optional)