Meiko TopLine Series User Manual

9 / 48
9617722
For the sequence of the individual displays, see 6.9 Displays
During the heating phase until the end of the program, the operation field also shows the
A
0
value. If the wash-chamber door is not opened after the end of the program, the cool-
ing fan continues to run for a pre-set time and dries the utensils further.
The disinfection capability complies with the capability required DIN ISO 15883 Part 3,
”Requirements for and Testing of Cleaning/disinfection machines using Thermal Disin-
fection for Containers for Human Excreta” which specifies a minimum A
0
value of 60.
4.2 Model and options
The cleaning and disinfection machine is available in the following models and design
options.
Models:
 MEIKO TopLine 10 (wall-mounted)
 MEIKO TopLine 20 (standing)
 MEIKO TopLine 30 (Built-in model)
MEIKO TopLine 40/40E (Cabinet model)
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320
Temperature in
°C
Time in seconds
Wash chamber temperature / wash
ware
Cold water
cleaning
Hot water cleaning
step 1-3
Disinfection
A0 60
Heating
Drying
cooling

Meiko TopLine Series Specifications

General

Brand	Meiko
Category	Cleaning Equipment
Capacity	Varies by model
Type	Dishwasher
Series	TopLine
Theoretical capacity	Varies by model
Energy Efficiency	High
Control System	Electronic