MELAG Vacuklav 44 B+ Evolution - Settings; Logging; Immediate log output; Deactivating immediate output

10 Settings
45
10 Settings
Logging
All settings pertaining to the output of text and graphic logs i.e. output medium, log format, immediate out-
put etc. are performed in menu Settings > Logging.
To this end, you are led through a settings wizard.
Immediate log output
In its delivery state, the immediate output of the text and graphic logs via the CF is activated.
Deactivating immediate output
If log output is not to be performed immediately following the end of a program, but saved in the internal
memory, (e.g. to be collected and outputted together within a single week), you can deactivate the immedi-
ate output option. Proceed in the following fashion:
ü You are in menuSettings >Logging.
1. Remove the checkmark in front of optionImmediate
output.
2. Press repeatedly on CONTINUE until you reach the
summary window.
3. Press SAVE to save the setting.
Outputting graphic logs (optional)
PLEASE NOTE
Graphic logs cannot be saved in the internal log memory. A subsequent output of
graphic logs is thus not possible.