Thank you for choosing a Meliconi remote control.
The SPEEDY 210 Combo remote control is designed to command a TV and a DECODER (satellite or digital terrestrial).
SPEEDY 210 Combo is a simplified remote control; it provides ONLY the functions on the keypad.
IMPORTANT! When the remote control is set to control only the TV, all the buttons will control the TV; whilst when it is set to
control 2 devices (TV + DECODER), only the light blue buttons will control the TV, whilst the dark blu buttons will control
the DECODER.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V AAA/LR03 alkaline batteries, not included in the
package. Insert with the correct polarity as shown in figure.
DO NOT use rechargeable batteries.
BATTERIES TEST: Press and hold the ON/OFF [ ] button and check that the indicator light
remains on continuously until the button is released. If the light is off or blinks, the inserted
batteries are low, therefore they need replacement.
Before using the remote control, for each device you wish to control, it is essential to set a specific code, it matched.
Identify the specific code and set it into the remote control using one of the following ways:
www.meliconi.com/guide
Go to the website listed above, or use the qr-code on the side, to access online tool
SEARCH ACTIVATION CODE.
Once you have found the specifi c code for your device, set it in the remote control as
described in the ENTERING THE CODE DIRECTLY chapter.
ACTIVATION OF REMOTE CONTROL
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
SAFETY WARNINGS
The remote control must not be exposed to excessive heat sources or fire.
The product is not a toy. Keep out of reach of children or domestic animals.
Keep this booklet for future reference
To Next Page
Loading...
