10
30
Fig. 12: Removing the measuring spoon (Caeo® Varianza® CS)
Requirement: The appliance is ready for operation.
1. Remove the measuring spoon(10) from the bean chute (30).
» The ashing display requests you to ll the bean chute.
2. Use the measuring spoon to ll a single portion of coee beans into the
bean chute(30).
3. Place the measuring spoon back onto the bean chute.
» The lighting display indicates that the My Bean Select® function is
ready.
4. Prepare any coee beverage.
Information
The measuring spoon is intended to help in lling the correct amount of
coee beans into the bean chute.
A full measuring spoon contains approx. 10 to 11 g of coee beans.
Depending on the desired coee strength, fewer coee beans can also
be lled.
If there are less than approx. 8g coee beans in the bean chute, the
My Bean Select® function is not activated. As soon as you hang up the
measuring spoon again, the display goes out. The next time a coee is
dispensed, the coee beans from the bean chute are mixed with the
coee beans from the bean container.
To Next Page
Loading...
Need help?
General
