Melitta Caffeo Passione CS User Manual

Care and maintenance
41
ENGLISH
Buttons Displays Steps
4. Place the coee grounds container
beneath the outlet.
5. Remove the brewing unit and clean
it as described in section8.2 Cleaning
the brewing unit on page36. Do not
switch o the appliance.
6. Place a cleaning table in the brewing
unit (see Fig. 18). Insert the brewing
unit into the appliance as described in
section8.2 Cleaning the brewing unit
on page36.
» The appliance indicates that the
third programme stage is reached.
» The cleaning process starts.
» After several minutes, the appli-
ance indicates that:
 the fourth programme stage is
reached
 the drip tray and the coee
grounds container must be
emptied.
7. Empty the drip tray and the coee
grounds container.
8. Insert the drip tray without the coee
grounds container.
9. Place the coee grounds container
beneath the outlet.
» The appliance indicates that the
last program stage is reached.
» The cleaning process is continued.
» The appliance then indicates
that the drip tray and the cof-
fee grounds container must be
emptied.
10. Empty the drip tray and the coee
grounds container.
11. Insert the drip tray and the coee
grounds container.
» The appliance is ready for operation.

Melitta Caffeo Passione CS Specifications

General

Brand	Melitta
Model	Caffeo Passione CS
Category	Coffee Maker
Language	English