Symbol on the
selector switch
or buttons
Displays Steps
8. Insert the water tank again.
» The descaling process starts.
» After several minutes, the appli-
ance indicates that:
the third programme stage is
reached
the rotary regulator must be
actuated.
9. Turn the rotary regulator clockwise up
to the stop.
» The descaling process is continued.
» After several minutes, the appli-
ance indicates that the drip tray
and the coee grounds container
must be emptied.
10. Empty the drip tray and the coee
grounds container.
11. Insert the drip tray without the coee
grounds container.
» The appliance indicates that:
the fourth programme stage is
reached
the water tank must be lled.
12. Place the coee grounds container
beneath the Cappuccinatore.
13. Open the lid of the water tank and
pull the water tankupwards out of the
appliance by the handle.
14. Empty and clean the water tank.
15. Fill the water tank with fresh water
and re-insert it.
» Hot water ows into the coee
grounds container.
To Next Page
Loading...
Need help?
General
