Melitta Caffeo Passione User Manual

Basic operation
68
ENGLISH
4 Basic operation
This chapter describes basic operating steps for using the appliance on a
daily basis.
4.1 Switching the appliance on and o
Before switching on after starting up the appliance for the rst time, read
chapter 3.5 Switching on and venting the appliance for the rst time on
page66.
Information
ū When switched on and o, the appliance performs automatic rinsing.
ū During rinsing, rinsing water is also conducted into the drip tray.
Switching on the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button (7).
3. The appliance heats up and performs automatic rinsing.
» The appliance indicates the last set coee strength.
Information
If the appliance was only switched o briey, there is no automatic rinsing
after switching on.
Switching o the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button (7).
» The appliance performs automatic rinsing.
» The appliance switches o.
Information
ū The appliance switches o automatically when it is not operated for a
long time. Automatic rinsing is also carried out in this case.
ū The o time can be set in the service mode (see section7.3 Setting Auto
OFF on page83).
ū If no beverage has been prepared since switching on or if the water tank
is empty, no rinsing takes place.

Melitta Caffeo Passione Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.2 L
Coffee beans capacity	125 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Control type	Buttons, Rotary
Product color	Silver
Built-in display	No
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Ristretto making	-

Weight and Dimensions

Depth	380 mm
Width	253 mm
Height	390 mm
Weight	8000 g