Melitta Caffeo Passione User Manual

First steps
67
ENGLISH
7
Fig. 5: ON/OFF button
Requirement: The appliance has been installed and connected.
1. Place a vessel beneath the Cappuccinatore.
2. Press the ON/OFF button (7).
» The appliance indicates that the water tank needs to be lled.
3. Remove the water tank. Rinse out the water tank with clean water. Fill
the water tank with fresh water and insert it.
» The lighted display indicates that the rotary regulator must be
actuated.
4. Turn the rotary regulator on the control panel clockwise up to the stop.
» Hot water ows out of the Cappuccinatore.
5. When water no longer ows out of the Cappuccinatore, turn the rotary
regulator anti-clockwise to the stop.
» Hot water ows out of the outlet.
» The appliance is vented.
6. Fill coee beans into the bean container (see section4.3 Filling coee
beans into the bean container on page69).
7. As required, you can now either
a) set the water hardness (see section7 Changing basic settings on
page82) or
b) use a water lter (see section8.6 Using a water lter on page98).

Melitta Caffeo Passione Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.2 L
Coffee beans capacity	125 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Control type	Buttons, Rotary
Product color	Silver
Built-in display	No
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Ristretto making	-

Weight and Dimensions

Depth	380 mm
Width	253 mm
Height	390 mm
Weight	8000 g