Melitta Caffeo Passione User Manual

Using the My Bean Select® function
76
ENGLISH
10
30
Fig. 12: Removing the measuring spoon (Caeo® Varianza® CS)
Requirement: The appliance is ready for operation.
1. Remove the measuring spoon(10) from the bean chute (30).
» The ashing display requests you to ll the bean chute.
2. Use the measuring spoon to ll a single portion of coee beans into the
bean chute(30).
3. Place the measuring spoon back onto the bean chute.
» The lighting display indicates that the My Bean Select® function is
ready.
4. Prepare any coee beverage.
Information
The measuring spoon is intended to help in lling the correct amount of
coee beans into the bean chute.
ū A full measuring spoon contains approx. 10 to 11 g of coee beans.
Depending on the desired coee strength, fewer coee beans can also
be lled.
ū If there are less than approx. 8g coee beans in the bean chute, the
My Bean Select® function is not activated. As soon as you hang up the
measuring spoon again, the display goes out. The next time a coee is
dispensed, the coee beans from the bean chute are mixed with the
coee beans from the bean container.

Melitta Caffeo Passione Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.2 L
Coffee beans capacity	125 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Control type	Buttons, Rotary
Product color	Silver
Built-in display	No
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Ristretto making	-

Weight and Dimensions

Depth	380 mm
Width	253 mm
Height	390 mm
Weight	8000 g