Melitta Caffeo Passione User Manual

Basic operation
74
ENGLISH
4.8 Emptying the drip tray and coee grounds container
After several beverage dispensing processes, the drip tray(6) and the coee
grounds container(5) can become full and must be emptied. The projecting
oat(16) indicates the current lling level of the drip tray.
After a specied number of beverage have been dispensed, the appliance
also shows that the drip tray and coee grounds container are full.
Always empty the drip tray and coee grounds container.
5
16
6
Fig. 11: Emptying the drip tray and coee grounds container (Caeo® Vari-
anza® CS)
1. Pull the drip tray (6) forwards out of the appliance.
2. Remove the coee grounds container (5) and empty it.
3. Empty the drip tray.
4. Insert the coee grounds container.
5. Push the drip tray into the appliance up to the stop.
Information
If you empty the drip tray and the coee grounds container while the appli-
ance is switched o, the appliance does not register this process. Therefore,
it is possible that you are requested to empty the containers although the
drip tray and the coee grounds container are not yet full.

Melitta Caffeo Passione Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.2 L
Coffee beans capacity	125 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Control type	Buttons, Rotary
Product color	Silver
Built-in display	No
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Ristretto making	-

Weight and Dimensions

Depth	380 mm
Width	253 mm
Height	390 mm
Weight	8000 g