Melitta Caffeo Passione User Manual

Care and maintenance
94
ENGLISH
8.5 Running the descaling programme
The descaling programme is used to remove limescale deposits in the inte-
rior of the appliance with fully automatic coee maker descaling agents.
To avoid damage to the appliance, we recommend running the "Descaling"
programme every 3 months or as requested by the appliance.
The descaling programme takes approximately 25 minutes and should not
be interrupted.
CAUTION
Contact with fully automatic coee maker descaling agent may lead to
eye and skin irritation.
 Observe the processing instructions on the packaging of the fully auto-
matic coee maker descaling agent.
CAUTION
Hot water and hot steam owing out of the pipe
 Do not touch the steam pipe during and immediately after use.
 Wait until the steam pipe has cooled down.
ATTENTION
Use of unsuitable descaling agent may damage the appliance.
 Only use the Melitta® ANTI CALC Espresso Machines liquid descaling
agent.
ATTENTION
A water lter may be damaged if it is screwed in during the descaling
programme.
 Remove the water lter.
 Place the water lter into a vessel lled with tap water during the descal-
ing programme.
 The water lter can be reinserted and reused on completion of the des-
caling programme.

Melitta Caffeo Passione Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	- cups
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.2 L
Coffee beans capacity	125 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Control type	Buttons, Rotary
Product color	Silver
Built-in display	No
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Ristretto making	-

Weight and Dimensions

Depth	380 mm
Width	253 mm
Height	390 mm
Weight	8000 g