Melitta Caffeo Varianza CSP - Using a water filter

Care and maintenance
43
ENGLISH
The water lter(42) is screwed in and unscrewed from the thread (43) on
the base of the water tank(1) using the screwing aid(41).
Inserting the water lter
Information
Place the water lter into a vessel lled with fresh tap water for a few
minutes before inserting it.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Insert lter menu.
3. Select Start using the arrow buttons and conrm with "menu/ok".
4. Follow the further instructions on the display.
» The water hardness is automatically set to Soft.
» The ready symbol appears on the display.
Changing the water lter
Change the water lter when the appliance requests you to do so.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Change lter menu.
3. Select Start using the arrow buttons and conrm with "menu/ok".
4. Follow the further instructions on the display.
» The ready symbol appears on the display.