OverviewRev 14.14.2036
Mellanox Technologies
12
1.4 Tools, Switch Firmware and Driver Software
Firmware Rev 14.14.2036 is tested with the following tools, SwitchX® firmware, and driver
software:
1.5 Supported FlexBoot
Firmware Rev 14.14.2036 supports the following FlexBoot:
1.6 Revision Compatibility
Firmware Rev 14.14.2036 complies with the following programmer’s reference manual:
• Mellanox Adapters Programmer’s Reference Manual (PRM), Rev 0.31 or later, which
has Command Interface Revision 0x5. The command interface revision can be retrieved
by means of the QUERY_FW command and is indicated by the field cmd_inter-
face_rev.
Table 9 - Tools, Switch Firmware and Driver Software
Supported Version
MLNX_OFED 3.2-2.0.0.0/3.2-1.1.0.1
MLNX_EN (MLNX_OFED based code) 3.2-2.0.0.0/3.2-1.1.0.1
WinOF-2 1.35/1.30
MFT 4.2.0/4.1.0
MLNX-OS • SwitchX: 3.4.3004
• Switch-IB: 3.5.1000
• Spectrum: 3.5.0530
SwitchX®/SwitchX®-2 Firmware 9.3.5080
Spectrum™ Firmware 13.300.328
Windows Inbox Drivers • Windows Server 2016 (Beta)
Please be aware that not all firmware binaries contain FlexBoot (support may vary
between cards, see
Section 1.1, “Supported Devices”, on page 6).
Table 10 - Supported FlexBoot
Supported Version
FlexBoot 3.4.719
To Next Page
Loading...
Need help?
General
