Do you have a question about the Mellanox Technologies ConnectX-4 Lx and is the answer not in the manual?
Manufacturer | Mellanox Technologies |
---|---|
Form Factor | Low Profile |
RoHS Compliance | Yes |
Category | Adapter |
Interface | PCIe 3.0 x8 |
Data Rate | 10/25/40/50/100 Gb/s |
Supported Protocols | Ethernet |
Operating Temperature | 0°C to 55°C |
Storage Temperature | -40°C to 70°C |
Humidity | 5% to 90% non-condensing |
Ports | Single or Dual Port |
Details on ordering part numbers, port speed, number of ports, and PCI Express speed for ConnectX-4 Lx cards.
Description of hardware features and capabilities, including Ethernet standards, memory, and overlay networks.
Lists supported operating systems and distributions, and details connectivity options.
Information on Ethernet, PCI Express, FRU EEPROM, LED, Heat Sink, SMBus, and Voltage Regulator interfaces.
Essential safety warnings, precautions, and environmental considerations for hardware installation.
Specifies hardware, software, and airflow requirements for installing the adapter cards.
Step-by-step instructions covering unpacking, pre-installation checks, and card installation.
Guidance on supported Mellanox cables and module installation.
Detailed steps and safety precautions for removing the adapter card from the system.
Guide for installing Mellanox OFED for Linux, including download, installation, and firmware updates.
Steps for downloading, installing, and uninstalling the Mellanox WinOF-2 driver for Windows.
Procedure for installing Mellanox NATIVE ESXi drivers for VMware vSphere environments.
Common problems and solutions for adapter detection and functionality.
Troubleshooting steps for Linux and Windows environments.
Technical data including physical, protocol support, power, and regulatory information for various card models.
Dimensional drawings and diagrams for different ConnectX-4 Lx adapter card configurations.
Examples of adapter card labels showing model, part number, serial number, and MAC address.