To Next PageTo Next Page
Need help?Do you have a question about the Mellanox Technologies MHQH29C-XTR and is the answer not in the manual?
General| Manufacturer | Mellanox Technologies |
|---|---|
| Model | MHQH29C-XTR |
| Maximum Data Transfer Rate | 40 Gbps |
| Data Transfer Rate | 40 Gbps |
| Connector Type | QSFP+ |
| Ports | 1 |
| Form Factor | Plug-in card |
| RoHS Compliance | Yes |
| Product Type | Adapter |
| Interface (Bus) Type | PCI Express |
| Data Link Protocol | Ethernet |
Identifies the target users for this adapter card manual.
Lists other relevant documents for Mellanox products and standards.
Provides links to Mellanox websites for support and downloads.
Explains terminology and notation used throughout the manual.
Details how to contact Mellanox for technical assistance and support.
Lists the specific Mellanox ConnectX-2 VPI adapter card models covered.
Explains the coding scheme used in Mellanox adapter card part numbers.
Guides users on locating unique identifiers on the adapter card label.
Provides critical safety precautions for handling and installing the adapter card.
Details the various input/output ports and connectors on the adapter card.
Describes the InfiniBand connectivity and compliance of the adapter card.
Describes the Ethernet connectivity and compliance of the adapter card.
Explains how to configure the Virtual Protocol Interconnect (VPI) port modes.
Details the PCI Express interface specifications and capabilities.
Explains the meaning and function of the LEDs on the adapter card's I/O panel.
Describes the I2C interface used for debugging and configuration.
Covers the power requirements and voltage details for the adapter card.
Specifies the power level supported for QSFP transceivers.
Details the different memory components (System, SPI Flash, EEPROM) on the card.
Describes the use of system memory for storing connection information.
Details the on-board SPI Flash memory device and its configuration.
Describes the EEPROM used for storing Vital Product Data (VPD).
Specifies the necessary hardware prerequisites for installing the adapter card.
Provides step-by-step guidance for physically installing the adapter card.
Guides users on how to locate the installed adapter card in the system.
Specific instructions for identifying the card within the Windows operating system.
Specific instructions for identifying the card within the Linux operating system.
Details the types of cables and modules compatible with the adapter card.
Information on compatible optical modules for QSFP ports.
Information on adapter modules for connecting SFP+ cables.
Provides instructions on how to connect and disconnect cables to the adapter.
Details the software drivers required for the adapter card's operation.
Instructions for downloading and installing drivers on Linux systems.
Instructions for downloading and installing drivers on Windows systems.
Explains how to configure port protocols (Ethernet/InfiniBand) using software.
Describes the FlexBoot feature for remote booting over Ethernet or InfiniBand.
Details support for GPU-to-GPU communication acceleration.
Explains the CORE-Direct feature for offloading communication tasks.
Describes the implementation of RDMA over Ethernet using DCB.
Provides steps to check and update the adapter card's firmware.
Detailed technical specifications for the MHQH19C-X[TSR] adapter card model.
Detailed technical specifications for the MHRH19B-X[ST]R adapter card model.
Detailed technical specifications for the MHQH19B-X[ST]R adapter card model.
Detailed technical specifications for the MHQH29C-X[ST]R adapter card model.
Detailed technical specifications for the MHRH29B-X[ST]R adapter card model.
Detailed technical specifications for the MHQH29B-X[ST]R adapter card model.
Illustrates the physical dimensions and layout of the adapter card.
Provides information on compliance with various regulatory standards.
Details the pinout for the I2C-compatible connector on the adapter card.
Details the pinout for the PCI Express x8 edge connector.
Instructions for safely removing the original bracket from the adapter card.
Instructions for attaching the new bracket and gasket to the adapter card.
