Rev 1.6
Mellanox Technologies
56
Appendix C: Replacing a Tall Bracket With a Short Bracket
This section provides instructions on how to remove the tall bracket of a standard Mellanox Tech-
nologies adapter card and replace it with a short one. It includes the following sections:
• Removing a bracket
• Installing a new bracket
To replace the bracket you will need the following parts:
• the new bracket of the proper height
• one new QSFP EMI gasket
• the 2 screws saved from the removal of the bracket
• the 2 fiber washers saved from the removal of the bracket
To Next Page
Loading...
Need help?
General
