Mellanox Technologies ConnectX-4 Lx Firmware Release Notes

Rev 14.14.2036
Mellanox Technologies
25
6 FlexBoot Changes and New Features
For further information, please refer to FlexBoot Release Notes
(www.mellanox.com > Software > InfiniBand/VPI Drivers > FlexBoot).
Table 15 - FlexBoot Changes and New Feature
Version Description
3.4.719 • Added IPv6 support
• Added x64 architecture support in ConnectX-4 and Connect-IB adapter cards
• Removed support for the following SHELL CLI commands:
• Non-volatile option storage commands
• SAN boot commands
• Menu commands
• Login command
• Sync command
• DNS resolving command
• Time commands
• Image crypto digest commands
• Loopback testing commands
• VLAN commands
• PXE commands
• Reboot command
For further information, please refer to: http://ipxe.org/cmd
• Synced the source with iPXE (upstream sync)
3.4.650 • Added support for .mrom images larger than 128kB
• Added support for ConnectX-4 EN and ConnectX-4 Lx EN
• Synced the source with iPXE (upstream sync)
• Moved to flat real mode when calling INT 1a,b101 to avoid BIOSes issues
• Added support for detecting Spanning Tree Protocol non-forwarding ports (RSTP/
MSTP)

Mellanox Technologies ConnectX-4 Lx Specifications

General

Brand	Mellanox Technologies
Model	ConnectX-4 Lx
Category	Adapter
Language	English