Rev 14.14.2036
Mellanox Technologies
15
- Description: Older MFT versions (4.0.0 and 3.8.0) may indicate that the latest GA firmware
is old or that it cannot be compared with the existing firmware.
A message similar to the below will be displayed upon firmware upgrade stage:
# flint -d <mst device> -i <image> burn
Current FW version on flash: 12.1100.6630
New FW version: 12.0012.0572
Note: The new FW version is not newer than the current FW version on
flash.
Do you want to continue ? (y/n) [n] : y
WA : Choose one of the options below to upgrade firmware:
• Upgrade to the latest MFT version (4.1.0)
•Type “y” after the note flint provides
Run flint with the
"-force" flag
Keywords: Firmware Upgrade/MFT
591240 Description: Traffic that is loopbacked due to QP.force_loopback being equaled to 1, is
steered to the PF.
WA : N/A
Keywords: Ethernet Network
594964 Description: A minimum of 200 LFM is required in order to cool the MCX4411A-ACAN
adapter card.
WA : N/A
Keywords: Temperature
601485/
599810
Description: mlxfwreset does not function properly in old MFT versions after upgrading the
firmware image.
WA : Upgrade MFT to the latest release or use reboot/power cycle after upgrading firm-
ware.
Keywords: Firmware Tool
- Description: Windows Server 2016 Inbox driver cannot work with firmware v14.12.0780
WA : Use WinOF-2 v1.20 out-of-box driver
Keywords: Windows Inbox Drivers
- Description: Flashing the firmware requires server reboot.
Firmware cannot be flashed twice without server reboot after first flashing
WA : Reboot the server after firmware flashing
Keywords: Upgrading/Downgrading
Table 12 - Known Issues (Sheet 2 of 5)
Internal Ref. Issue
To Next Page
Loading...
Need help?
General
