2
Pay Attention!
• At least two people are required to safely mount the system in the rack.
• All servers and systems in the rack should be planned with the airflow
direction. All FRU components must have the same air flow direction. A
mismatch in the air flow will affect the heat dissipation.
• The part of the system to which you choose to attach the rails will
determine the system’s adjustable side. The system’s part to which the
brackets are attached will be adjacent to the cabinet.
•The FRU side is extractable. Mounting the rack brackets inverted to the
FRU side will allow you to slide the FRUs, in and out.
Package Contents
•1 x System
• Rail Kit for short depth (17”-24” / 432-610mm) or standard depth (24”-
34” / 610-863mm) racks
• 2 x Power cables – Type C13-C14
• 1 x Harness RS232 2M cable – DB9 to RJ-451 (included in SB7X00,
SB7780 and SX67X0 only)
•Quick Start Guide
• 2 x Cable retainers
If anything is damaged or missing, contact your Mellanox representa-
tive at support@mellanox.com.
To Next Page
Loading...
Need help?
General
