2
Pay Attention!
• All servers and systems in the rack should be planned with the airflow
direction. All FRU components must have the same air flow direction. A
mismatch in the air flow will affect the heat dissipation.
Package Contents
•1 x System
• 2 x Power cables – Type C13-C14
• 1 x Harness RS232 2M cable – DB9 to RJ-45
•Quick Start Guide
The following items are not included in the package, and can be pur-
chased separately:
• Rack installation kit for SN2100 series short depth 1U switches, allows
installation of one or two switches side-by-side into standard depth
racks (23.6"-31.5" / 600-800mm)
• 6 x Cable ties
• 2 x Cable retainers
If anything is damaged or missing, contact your Mellanox representa-
tive at support@mellanox.com.