MEMOLUB HPS - Memolub Hps Specifications

MEMOLUB
®
HPS Specifications
RKINS-0103 Copyright © 2003 PLI, LLC All Rights Reserved
MEMOLUB
®
HPS User’s Guide Page 22 of 39 PLI, LLC
PLI, LLC
Power Lube Injection
PLI,LLC * P.O. Box 044051 * 1509 Rapids Drive * Racine, WI 53404
Telephone: 800-635-8170 * Fax: 262-637-4090
Applications………………………...Up to 12 Lube Points (with distribution block)
Operating Pressure…………………..350psi (25 bar)
Pressure Build-up……………………Immediate
Check Function……………………...Yes
Stop/Start…………………………….Immediate
Temperature Range………………….5ºF to 120ºF (-15ºC to 50ºC)
Electronic Controls………………….Quartz Timer, Microprocessor
Lubricants…………………………...Oils and Greases (to NLGI #2)
Battery Pack…………………………4.5v Alkaline (optional Lithium)
Housing……………………………...Translucent Polycarbonate
Installation Thread…………………..¼” NPT (adaptors optional)
Remote Installation………………….Up to 40 feet (12 meters)
Reusable……………………………..Yes
Dimensions:
Standard (Model 120).……….4 ½” x 4” (115mm x 101mm)
Mega (Model 240)…………...5 ¾” x 4” (147mm x 101mm)
Giga (Model 480)……………10 3/8” x 4” (264mm x 101mm)
Cartridge Capacity:
Standard (Model 120)………..120cc (approx. ¼ pound)
Mega (Model 240)…………...240cc (approx. ½ pound)
Giga (Model 480)……………480cc (approx. 1 pound)
Output Adjustment………………….....52 Settings
Typical Applications:
• Conveyors
• Pumps
• Electric Motors
• Bridge, Stacker, and Jib Cranes
• Air Makeup Units
• Roof Fans
• Air Conditioners
• Industrial Robots
• Waste-Water Equipment
• Heat-Treat Furnaces
• Coal-Handling Equipment
• Paper Mill Equipment
• Mining Equipment
• Production Equipment of All Kinds