Memorex MC7101 - Programming CD Tracks

12
OPERATION (CONTINUED)
With a CD inserted (see page 9), press
the Play/Pause
(
®p)/CD/ Power On
button to turn the unit on and select CD;
playback will start automatically. Press
the STOP (■)/OFF button 2 to stop
automatic playback.
2
1
1
Press the PROGRAM button 1 once; “P
01” (program number), “00” track number
and the Program indicator will appear in
the display. Select the first track to be
played back using the Tune/Skip/Search
l 2 or m 3 button, then press the
PROGRAM button 1 again. Repeat this
step to program additional tracks, up to
20 tracks.
3
1
2
2
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Press the PLAY/PAUSE (®p)/CD/
Power On button to begin playback.
The unit will play all the tracks in the
order you programmed them.
2
3
Adjust the VOLUME Up/Down buttons 1
as desired. When the disc is through
playing, it will stop. Press the STOP
(
■)/OFF button 2 to stop the disc before
it is finished.
1
2
4
NOTES:
• To skip forward or backward through the programs, press the Tune/Skip/
Search
l or m button.
• Programming is the ability to preselect the order in which a series of tracks will
be played.
FAQ: How do I clear the memory and exit the Program Playback mode?
While in the Program Stop mode, press the STOP (■)/OFF button; the
"PROGRAM" indicator will disappear from the display.