9
CD OPERATION (CONTINUED)
If the CD player is subject to vibration
during playback, the bars will
disappear one by one. During the
vibration, the music should continue to
play the signals stored in the memory
until the CD player can read the music
data properly from the disc. At this
time, the indicator will probably show
fewer bars indicating the music signals
stored in memory are low.
5
If all the bars disappear and the CD
player is subject to immediate vibration,
the unit may skip.
6
If no more vibration occurs, the
music signals are once again stored
into the memory and the indicator
returns to full. When the memory is
full, the top bar will blink and the
disc rotation speed will drop to save
power consumption.
7
To turn the Anti-Shock System off,
press the ESP button.
To turn the Anti-Shock System on,
press the ESP button again.
8
NOTES:
• When the CD player is used in a stable location, turn the Anti-Shock System
off by pressing the ESP button. When the Anti-Shock System is off, battery
consumption is less.
• The Anti-Shock System provides for continuous sound output when the unit
is subject to vibration, but it will not correct errors, such as a defective or
dirty CD.
To Next Page
Loading...
Need help?
General
