10
OPERATION (CONTINUED)
USING THE RADIO
Antenna
FM: Unravel and extend the FM wire antenna for best reception.
Turn this unit on by pressing the
POWER button.
1
Repeatedly press the MODE button
to select FM mode; “FM” and the
frequency will appear in the display.
2
Repeatedly press the Tune/
Skip/Search o 1 or n 2 button to
manually advance the frequency in
the display up or down until the
desired frequency appears.
For auto tuning, press and hold the
Tune/Skip/Search o 1 or n 2
button until the frequency in the
display starts to scan and then
release; the tuner will search and
then stop on the next strong station
it finds. Repeat this step until the
desired frequency appears in
the display.
3
NOTES:
• When a station is tuned, after
three seconds, the radio
frequency will disappear and
the actual time will reappear in
the display.
• See the previous page for how
to adjust the volume.
• To turn this unit off, press the
POWER button.
• STEREO: If a strong stereo
station is broadcasting, the FM
Stereo indicator will light.
To Next Page
Loading...
Need help?
General
