12
INPUT CONNECTIONS
Connect a DVD to the DVD Audio In jacks and a TV to the TV Audio In jacks to output
the sound through this speaker.
DVD: To listen to the DVD player connected to the DVD In jacks, press the
FUNCTION button until DVD appears in the display.
TV: To listen to the TV connected to the TV In jacks, repeatedly press the
FUNCTION button until TV appears in the display.
NOTES:
• When connecting the unit, refer to the owner’s manual of the TV, as
well as this manual.
• When connecting the unit, make sure the power is off and both units
are unplugged before making any connections.
• Instead of the TV’s or DVD’s audio output, you can use external audio
equipment, such as a non-iPod MP3 audio player, with audio left and
right out jacks.
• If your TV only has one audio input, the use of a “Y” connector may
be necessary. Visit your local electronics supply store.
To Next Page
Loading...
