Memorex MIHTS3202 User Manual

14
INSERTING AN IPOD
Rotate the iPod compartment as
shown. Insert the Universal Dock
included with your iPod (A) into
the iPod compartment (B) (as
shown), making sure the tabs are
facing front, and slip the tabs into
place. Press the rear side of the
Universal Dock until it is
positioned inside the iPod
compartment.
NOTE: You cannot use the
iPhone or iShuffle with this unit.
(
A
)
(
B
)
1
Slide the iPod into the Universal
Dock (as shown). Gently push
down so the connector on the
iPod slides onto the connector on
this unit.
2
Insert the iPod onto the holder. Gently push down so the connector on the
iPod slides onto the connector on the unit. If the unit is turned off, once you
connect the iPod, “iPod” will appear briefly in the display and then enter
Standby mode. Press the STANDBY/ON button to turn the unit ON.
Press the FUNCTION button to select the iPod mode.
3
NOTES:
• CHARGING: When the iPod is inserted into the dock, the iPod’s battery will
charge until it is full.
• When the iPod is connected to this unit, it will be in the Pause mode.
• To remove the Universal Dock, insert your finger (or other object) into the gap
in the Universal Dock, then gently pull the Universal Dock out to remove it.
All manuals and user guides at all-guides.com

Memorex MIHTS3202 Specifications

General

Brand	Memorex
Model	MIHTS3202
Category	Speaker System
Language	English