Memorex MIHTS3202 - Basic iPod Operation with the Unit; Powering On and Selecting iPod Mode; Playback Control: Play and Pause; Track Navigation: Skip and Search

15
OPERATION
With an iPod connected (see
previous page), if this unit is not
already on, turn this unit on by
pressing the POWER ON/OFF
switch on the main unit to the ON
position. If in the Standby mode,
simply press the STANDBY/ON
button on the remote; the Standby
indicator will go out.
1
Repeatedly press the FUNCTION
button to select iPod mode; “iPod”
will appear in the display. You can
operate the iPod using its own
controls, as per its owner’s
manual, or you can use the
controls on this unit to operate the
iPod.
2
USING AN iPod WITH THIS UNIT
To play/pause the iPod:
Press the PLAY/PAUSE (®p)
button to start playback on your
iPod. Press again to pause
playback; press once more to
resume playback.
3
To skip forward or backward on
the iPod: Press the Skip/Search o
1 or n 2 button to skip to the
beginning of the current, previous
or next track.
To search forward or backward
on the iPod: Press and hold the
Skip/Search o 1 or n 2 button to
search within the currently-playing
track.
1
2
4
CONTINUED ON THE NEXT PAGE
All manuals and user guides at all-guides.com