Memorex MP3142 - Operation: Programming Playback; Programming Tracks;Files

OPERATION (CONTINUED)
14
Rotate the Function control to the CD
position to turn the unit on and select
CD mode. Insert a disc as described
on page 10.
1
1
1
Press the PROG button; “PROG” and
“P01” will blink in the display.
1
2
2
For CD, use the Skip/Search o 1 or n
2
button to select the first track to be
programmed.
For MP3 disc, use the ALBUM UP but-
ton
3 to select the desired album,
then use the Skip/Search
o 1 or n 2
button to select the first track/file to be
programmed.
1
2
3
3
Press the PROG button again; the
selected track/file has now been pro-
grammed and counted as program 1.
1
2
4
Repeat steps 3 and 4 to program the other
desired tracks/files in sequence.
When the program memory is full, “- - -” will
blink in the display.
1
2
5
Press the PLAY/PAUSE (®/p) button to
begin Programmed playback; “PROG”,
“®” and the track/file number (and “MP3”
if an MP3 disc is inserted)
will appear in
the display
and the tracks/files will play in
the order programmed.
2
1
6
TO PROGRAM THE MEMORY (UP TO 20 CD TRACKS/10 MP3 FILES)
SEE NEXT PAGE FOR NOTES ON PROGRAMMED PLAY