OPERATION (CONTINUED)
12
NOTES ON PROGRAMMED PLAY:
• Programming is the ability to preselect the order in which a series of tracks will
be played.
• Each track may be stored in the program memory as many times as desired (up
to 20).
• As each track is played, its track number will be displayed. You can move for-
ward or backward through the programmed tracks with the SKIP/SEARCH o or
n buttons.
• The CD player will stop after all programmed tracks have been played or the
STOP (I) button is pressed.
• To stop Program playback, press the STOP (I) button. To play back the program
again, press the PROGRAM button followed by the PLAY/PAUSE (®p) button.
• To clear the program memories, while in the Stop mode, slide the FUNCTION
switch to select Radio or Off, or open the CD Compartment door.
It is also possible to use the Program
and Repeat functions together to
repeat a specific program indefinitely.
First, program the tracks you wish to
hear in the order you wish to hear
them, as described on page 11. Press
the PLAY/PAUSE (®p) button to
begin Programmed playback.
1
Then, press the REPEAT button
twice. The “PROGRAM” indicator will
blink and the “REPEAT ALL” indicator
will appear in the display. The player
will repeatedly play back the tracks
you selected in the order in which you
programmed them. When the last
track in the program has been played,
the entire program will begin again.
2
PROGRAMMED REPEAT
To cancel the Programmed Repeat function: Press the REPEAT button until
“REPEAT” disappears from the display to cancel the Repeat function and press
the STOP (I) button to stop the Program playback function.
NOTE: Program Repeat operation will continue indefinitely until you press the
STOP (I) button.
To Next Page
Loading...
Need help?
General
