Need help?Do you have a question about the Memphis 16-MCD 000 and is the answer not in the manual?
Lists key features like high efficiency, Ohm stability, and protection circuitry for all MClass models.
Explains the meaning of Green (Power), Red (Protection), and Yellow (Fuse Fault) indicator lights on the amplifier.
Explains the gain control function, not volume, for adjusting amplifier input sensitivity and achieving full output.
Describes the LPF for removing high frequencies and its adjustable range (50-250Hz) and slope (18dB/oct).
Explains the sub-sonic filter's role in protecting subs from over-excursion and how to set it relative to port tuning.
Lists key features like high efficiency, Ohm stability, and protection circuitry for all MClass models.
Explains the meaning of Green (Power), Red (Protection), and Yellow (Fuse Fault) indicator lights on the amplifier.
Explains the gain control function, not volume, for adjusting amplifier input sensitivity and achieving full output.
Describes the LPF for removing high frequencies and its adjustable range (50-250Hz) and slope (18dB/oct).
Explains the sub-sonic filter's role in protecting subs from over-excursion and how to set it relative to port tuning.
General| Channels | 1 |
|---|---|
| Signal to Noise Ratio | >90dB |
| Bass Boost | 0-18dB |
| Frequency Response | 10Hz - 250Hz |
| Subsonic Filter | 10Hz - 50Hz |
| Fuse Rating | 120A |
| RMS Power @ 4 Ohms | 500W |
| Crossover Frequency | 50Hz-250Hz |
| Low Pass Crossover | 50Hz-250Hz |
To Next Page
