Need help?Do you have a question about the Memphis 16-PR200.2 and is the answer not in the manual?
Overview of Memphis Car Audio Studio Series amplifiers and their high quality audio reproduction.
Key features across all 2 and 4 channel models, including new design and protection circuitry.
Explanation of the green indicator light and its meaning for amplifier status.
Guidelines for mounting amplifiers, ensuring proper ventilation and avoiding damage during installation.
Instructions for connecting the 12V+, Ground, and Remote Turn On terminals, including fuse placement.
Details on connecting RCA jacks for low-level inputs and high-level speaker inputs.
Guidance on connecting speakers, maintaining polarity, and impedance requirements for stereo and bridged modes.
How to adjust gain, high-pass filters (HPF), low-pass filters (LPF), and flat-no filter settings.
Explanation of Bass Boost functionality and operation of other amplifier features and controls.
Steps to diagnose and resolve common issues like no output, one channel working, weak output, and noise.
Technical specifications for various Memphis Car Audio amplifier models, including power, impedance, and frequency response.
Procedure for requesting amplifier service, including required documentation and contact details.
Overview of Memphis Car Audio Studio Series amplifiers and their high quality audio reproduction.
Key features across all 2 and 4 channel models, including new design and protection circuitry.
Explanation of the green indicator light and its meaning for amplifier status.
Guidelines for mounting amplifiers, ensuring proper ventilation and avoiding damage during installation.
Instructions for connecting the 12V+, Ground, and Remote Turn On terminals, including fuse placement.
Details on connecting RCA jacks for low-level inputs and high-level speaker inputs.
Guidance on connecting speakers, maintaining polarity, and impedance requirements for stereo and bridged modes.
How to adjust gain, high-pass filters (HPF), low-pass filters (LPF), and flat-no filter settings.
Explanation of Bass Boost functionality and operation of other amplifier features and controls.
Steps to diagnose and resolve common issues like no output, one channel working, weak output, and noise.
Technical specifications for various Memphis Car Audio amplifier models, including power, impedance, and frequency response.
Procedure for requesting amplifier service, including required documentation and contact details.
General| Channels | 2 |
|---|---|
| Bass Boost | 0-12dB @ 45Hz |
| Input Sensitivity | 200mV - 6V |
| Minimum Impedance | 2 Ohms |
| Crossover Slope | 12dB |
| Crossover Frequency | 50Hz - 250Hz |
To Next Page
