Need help?Do you have a question about the Memphis 16-PR2.100 and is the answer not in the manual?
Details speaker connections for 2-channel amplifier models, including stereo and mono modes.
Details speaker connections for the 4-channel amplifier model in various modes.
Explains the mixed stereo/mono mode configuration for amplifier speaker connections.
Explains the gain control's function as a signal level adjustment, not a volume control.
Details the HPF's function to remove low frequencies and its adjustable range.
Details the LPF's function to remove high frequencies and its adjustable range.
Describes the Flat setting which bypasses all crossovers for full-range signal.
Explains the bass boost function, noting its switchable nature and variable option.
Provides guidance for common issues such as no output, one channel operation, weak output, and noise.
Details speaker connections for 2-channel amplifier models, including stereo and mono modes.
Details speaker connections for the 4-channel amplifier model in various modes.
Explains the mixed stereo/mono mode configuration for amplifier speaker connections.
Explains the gain control's function as a signal level adjustment, not a volume control.
Details the HPF's function to remove low frequencies and its adjustable range.
Details the LPF's function to remove high frequencies and its adjustable range.
Describes the Flat setting which bypasses all crossovers for full-range signal.
Explains the bass boost function, noting its switchable nature and variable option.
Provides guidance for common issues such as no output, one channel operation, weak output, and noise.
General| Series | PR |
|---|---|
| Channels | 2 |
| RMS Power @ 4 Ohms | 100W x 2 |
| RMS Power @ 2 Ohms | 150W x 2 |
| Bridged RMS Power @ 4 Ohms | 300W x 1 |
| Frequency Response | 20Hz - 20kHz |
| Crossover Slope | 12 dB/octave |
| Bass Boost | 0-12 dB |
| Signal-to-Noise Ratio | >90dB |
To Next Page
