Need help?Do you have a question about the Memphis 16-PR4.50 and is the answer not in the manual?
Lists key features like 2ohm stereo stability, high/low level inputs, bass boost, and protection circuitry.
Details speaker connection methods (stereo and mono) for 2-channel amplifier models.
Details speaker connection methods (4CH, 3CH, 2CH modes) for the 4-channel amplifier model.
Explains the mixed stereo/mono configuration for connecting speakers and a subwoofer.
Covers gain adjustment and the function of High Pass (HPF) and Low Pass (LPF) filters.
Explains the 'Flat-no filter' setting and the bass boost functionality.
Lists key features like 2ohm stereo stability, high/low level inputs, bass boost, and protection circuitry.
Details speaker connection methods (stereo and mono) for 2-channel amplifier models.
Details speaker connection methods (4CH, 3CH, 2CH modes) for the 4-channel amplifier model.
Explains the mixed stereo/mono configuration for connecting speakers and a subwoofer.
Covers gain adjustment and the function of High Pass (HPF) and Low Pass (LPF) filters.
Explains the 'Flat-no filter' setting and the bass boost functionality.
General| Series | PR |
|---|---|
| Channels | 4 |
| RMS Power @ 4 Ohms | 50W x 4 |
| RMS Power @ 2 Ohms | 75W x 4 |
| RMS Power Bridged @ 4 Ohms | 150W x 2 |
| THD @ 4 Ohm | <1% |
| Frequency Response | 20Hz - 20kHz |
| Crossover Slope | 12dB/octave |
| Bass Boost | 0-12dB @ 45Hz |
| Total Harmonic Distortion (THD) | <1% |
| Peak Power Output | 300W |
| THD at Rated RMS Power | <1% |
| Fuse | 25A |
| Input Sensitivity | 200mV - 6V |
| Crossover | Variable High-Pass/Low-Pass |
To Next Page
