Need help?Do you have a question about the Memphis 16-PR2.50 and is the answer not in the manual?
Lists key features like 2-ohm stereo stable, high/low level inputs, bass boost, bridgeable operation, variable crossovers, and protection circuitry.
Explains how amplifiers can be used in stereo, bridged, or tri-mode for flexibility.
Details the adjustable high and low pass filters with 12dB per octave slopes for tailoring sound.
Covers protection against faults and explains the meaning of the blue indicator light.
Advises on choosing a ventilated location, avoiding obstacles, and securing the amplifier safely.
Provides a table of recommended wire gauges and fuse values for each amplifier model.
Details how to properly connect the ground wire and the remote turn-on lead.
Explains how to connect low-level (RCA) and high-level (speaker level) inputs.
Details how to connect speakers to 2-channel models in stereo and mono (bridged) modes.
Explains different speaker connection configurations for the 4-channel model.
Illustrates and explains the mixed stereo/mono (tri-mode) speaker connection setup.
Explains the function of the gain control and how to adjust it for optimal output.
Details how to use and set the adjustable high pass filter (crossover) for speaker protection.
Describes the low pass filter adjustment and the "Flat" setting for bypassing crossovers.
Explains the bass boost feature, its variability, and recommended usage.
Provides steps to diagnose and fix issues with no sound or only one channel working.
Offers solutions for low audio output and common noise problems like engine whine or pops.
Lists key features like 2-ohm stereo stable, high/low level inputs, bass boost, bridgeable operation, variable crossovers, and protection circuitry.
Explains how amplifiers can be used in stereo, bridged, or tri-mode for flexibility.
Details the adjustable high and low pass filters with 12dB per octave slopes for tailoring sound.
Covers protection against faults and explains the meaning of the blue indicator light.
Advises on choosing a ventilated location, avoiding obstacles, and securing the amplifier safely.
Provides a table of recommended wire gauges and fuse values for each amplifier model.
Details how to properly connect the ground wire and the remote turn-on lead.
Explains how to connect low-level (RCA) and high-level (speaker level) inputs.
Details how to connect speakers to 2-channel models in stereo and mono (bridged) modes.
Explains different speaker connection configurations for the 4-channel model.
Illustrates and explains the mixed stereo/mono (tri-mode) speaker connection setup.
Explains the function of the gain control and how to adjust it for optimal output.
Details how to use and set the adjustable high pass filter (crossover) for speaker protection.
Describes the low pass filter adjustment and the "Flat" setting for bypassing crossovers.
Explains the bass boost feature, its variability, and recommended usage.
Provides steps to diagnose and fix issues with no sound or only one channel working.
Offers solutions for low audio output and common noise problems like engine whine or pops.
General| Signal-to-Noise Ratio | >90dB |
|---|---|
| Channels | 2 |
| THD at RMS Power | <1% |
| Low Pass Crossover | 50Hz - 250Hz |
| Bass Boost | 0dB - 12dB |
| Input Sensitivity | 200mV - 4V |
To Next Page
