Need help?Do you have a question about the Memphis 16-PRD 1000.1 and is the answer not in the manual?
Inspect mounting location carefully to avoid damaging vehicle components.
Install the fuse at the battery last to prevent damage.
Checks connections, fuses, signal source, and potential overheating.
Checks speaker connections, balance control, and input plug reversal.
Check input sensitivity control adjustment.
Inspect mounting location carefully to avoid damaging vehicle components.
Install the fuse at the battery last to prevent damage.
Checks connections, fuses, signal source, and potential overheating.
Checks speaker connections, balance control, and input plug reversal.
Check input sensitivity control adjustment.
General| RMS Power at 1 Ohm | 1000W x 1 |
|---|---|
| Number of Channels | 1 |
| THD at RMS Power | <1% |
| Bass Boost | 0 - 12dB |
| Fuse Rating | 100A |
| Input Sensitivity | 0.2V - 6V |
| Crossover Low Pass | 50Hz - 250Hz |
| Subsonic Filter | 10Hz - 50Hz |
To Next Page
