Mendota FV34 - 4.10.1.2 Procedure to Convert This Fireplace to Burn LPG

85-03-01107 FV34 DECOR Page 55
Procedure to Convert This Fireplace to Burn LPG
This Fireplace arrives from the factory ready to burn natural gas. If you intend to burn LPG, it is recommended that you convert
this fireplace and its pressure regulator, pilot orifice slider position and burner orifices prior to placing this fireplace in its
framed cavity. See diagrams, on this page, and follow these instructions to prepare this fireplace for conversion to LPG.
Figure 4-10 Remove Burner Airbox