CUSTOM SIZE BAGS
1� Roll out an appropriate length for the food to be packaged + 5 cm� Clip or cut o with a sharp
knife� Make sure to cut straight�
2� Plug in the power cord�
3� Open the cover� Place one end of the bag in the sealing strip� It does not matter if the
material comes on the seal�
4� Close the cover by pressing both sides� The cover is closed correctly if it cannot be opened�
5� Press the SEAL button to seal the bag� The status lamp lights up during the sealing process�
6� The status lamp goes out when the seal is complete� Press the buttons on the sides of the
appliance to release the cover and remove the bag�
7� The custom bag is ready for the vacuum packing�
IMPORTANT! Make sure you allow the appliance time to cool� Wait at least 20 seconds between seals�
The appliance has overheating protection that automatically turns it o if it overheats� Should the
overheating protection trip, allow the appliance to cool for 25 minutes�
To Next Page
Loading...