Need help?Do you have a question about the Menvier Security MF9300 and is the answer not in the manual?
General| Brand | Menvier Security |
|---|---|
| Model | MF9300 |
| Category | Fire Alarms |
| Language | English |
Electrical insulation tests should not be performed with cables connected to the panel or detectors.
Connect supply, batteries, and check lights before panel mounting.
Press the System Reset button when powering up from a powered-down state.
Use the special forked key to open the upper door for service access.
Guide to understanding panel indicators and their corresponding required actions.
Describes the two operating modes and their LED indicators.
How to reset the panel and the self-testing period.
How to disable/enable specific zones or alarm lines using supervisor mode.
Table correlating fault indicators, conditions, and required actions.
Explains how fire conditions are indicated by panel lights.
Detailed technical data including zone count, voltage, battery, and dimensions.
To Next Page