Release 03/2009
25
en
Spectroquant
®
Colorimeter Picco COD / CSB
3 Menu options
3.1 Menu selections
After the instrument has been switched off, press the [SELECT] key and
hold depressed.
Switch the instrument on using the [ON/OFF] key.
Allow the 3 decimal points to be displayed before releasing the [SELECT]
key.
The [MENU] key enables the selection of the following menu points:
recall stored data
setting the date and time
user adjustment
The selected menu is indicated by an arrow in the display.
Confirm the selection with the [SELECT] key.
3.2 Recall of stored data
The instrument shows the last 16 data sets in the following format
(automatically proceeds every 3 seconds until result is displayed):
Number n xx (xx: 16...1)
Year YYYY (e. g. 2008)
Date MM.dd (monthmonth.dayday)
Time hh:mm (hourhour:minuteminute)
Method Method symbol (e. g. U.1)
Result xxx (U.1 - U.3) or x.xx (U.4)
The [ZERO/TEST] key repeats the current data set.
The [SELECT] key scrolls through all stored data sets.
Quit the menu by pressing the [MENU] key.
. . .
Menu
Select
Select
Zero
Test
On
Off
On
Off
Select
Menu
Select
Store
Date
Time
Cal
Store
To Next Page
Loading...
