Need help?Do you have a question about the Merck Spectroquant Prove 100 and is the answer not in the manual?
General| Type | Spectrophotometer |
|---|---|
| Wavelength Range | 320 - 1100 nm |
| Connectivity | USB, Bluetooth |
| Spectral Bandwidth | 4 nm |
| Wavelength Accuracy | ±1 nm |
| Photometric Accuracy | ±0.003 Abs at 0.5 Abs |
| Light Source | Tungsten halogen lamp |
| Display Size | 7 inch |
| Power Supply Voltage | 100-240 V AC |
| Dimensions | 270 x 400 x 220 mm |
| Weight | 3.5 kg |
| Bandwidth | 4 nm |
| Detector | Silicon photodiode |
| Measurement Modes | Absorbance, Transmittance, Concentration |
| Display | Color touchscreen |
| Interfaces | USB |
| Photometric repeatability | ±0.001 Abs |
| Display Type | Color touchscreen |
Specifies the spectrophotometer's exclusive use for photometric measurements.
Explains the touch-sensitive display and user interaction methods.
Outlines the steps required for the initial setup of the instrument.
Instructions on how to connect the power adapter to the instrument.
Guide for the initial power-on sequence and system booting.
Details the self-test procedure and its coverage for instrument verification.
Instructions for powering the spectrophotometer on and off.
Details the process and requirements for zero adjustment.
Provides specific instructions for zero adjustment with round and rectangular cells.
Lists conditions and recommendations for repeating zero adjustment.
Describes the different types of measurements the spectrophotometer can perform.
To Next Page
