MerCruiser 6.2 MPI User Manual

Section 5 - Maintenance
Page 64 90-864197072 NOVEMBER 2007
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Throttle cable pivot points &
guide contact surfaces
92‑883725K01
Transmission Linkage
IMPORTANT: The poppet ball must be centered in the detent hole for each F‑N‑R position.
1. Lubricate the detent ball and the holes in the shift lever.
a
5934
In‑Line Transmission
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Detent ball and shift lever
holes
92‑883725K01
2. Lubricate the shift cable pivot points.
a
a
5935
a - Pivot points
Tube Ref. No. Description Where Used Part No.
Synthetic Blend MerCruiser Engine
Oil SAE25W‑40
Shift cable pivot points 92‑883725K01

MerCruiser 6.2 MPI Specifications

General

Engine Type	V8
Alternator Output	65 amp / 917 watt
Compression Ratio	9.4:1
Displacement	6.2L (377 cu in)
Horsepower	300 hp
Fuel System	Multi-Port Fuel Injection (MPI)
Ignition	Distributorless Ignition (DTS)
Fuel Type	87 Octane Compatible
Max RPM	5400 RPM
Bore x Stroke	4.00 x 3.75 in / 101.6 x 95.25 mm