ArtNo.331-0005 Removing the grill rail
Fig.5-4
Fig.5-5
Fig.5-6
Fig.5-7
Wipe loose debris from the main top. Avoid using any
abrasive cleaners including cream cleaners. For best results
use a liquid detergent cleaner.
Rinse with cold water and thoroughly dry with a clean, soft
cloth. Make sure all parts are dry before repositioning.
Griddle (Optional Extra)
Always clean the griddle after use. Allow to cool completely
before removing. Immerse the griddle plate in hot soapy
water. Use a soft cloth or, for stubborn stains, a nylon washing
up brush.
Note: If the griddle is washed in a dishwasher then some
dishwasher residue may appear on the back. This is normal
and will not aect the performance of your griddle.
Glide-out Grill
Before you remove any of the grill parts for cleaning,
make sure that they are cool, or use oven gloves.
Wash the grill pan, trivet and grill tray in hot soapy water.
Alternatively, wash the grill pan in a dishwasher.
After grilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the trivet by using a nylon
brush.
To remove the grill pan pull the tray assembly forwards
(Fig.5-4) and then lift the grill pan clear of the grill tray
assembly (Fig.5-5).
For safety, push the grill tray back into the grill chamber.
If you need to remove the telescopic runners to allow
cleaning of the grill chamber, rst remove the grill tray then
you can unhook them from the grill chamber sides (Fig.5-6).
Wipe the sides clean with a soft cloth and mild detergent.
DO NOT put the side runners in a dishwasher.
Once you have nished, hook the side rails back onto the
sides of the chamber. Pull the telescopic rails out and t the
grill tray onto them, making sure to locate the cut-outs onto
the telescopic runner tabs (Fig.5-7).
Replace the grill pan.
To Next Page
Loading...
General