MAINTENANCE
94
• Steering cable lubrication fitting (if equipped) ‑ Steer the
outboard to fully retract the steering cable end into the
outboard tilt tube. Lubricate the steering cable through the
fitting.
a - Steering cable lubrication fitting
b - Steering cable end
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading to
serious injury or death from loss of boat control. Completely
retract the end of the steering cable before applying lubricant.
2. Lubricate the following with lightweight oil.
• Steering link rod pivot points ‑ Lubricate points.
3. Lubricate the following with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
To Next Page
Loading...
Need help?
General
