OPERATION
72
2. Tiller handle models ‑ Reduce the engine speed and shift the
outboard to the neutral position. Push in the engine stop
button.
Emergency Starting
If the starter system fails, use the spare starter rope (provided) and
follow this procedure.
!
WARNING
The neutral‑speed‑protection device is inoperative when starting
the engine with the emergency starter rope. Set the engine speed
at idle and the gear shift in neutral to prevent the outboard from
starting in gear.
1. Shift the outboard into neutral.
2. Ensure the lanyard stop switch is in the run position.
3. Remove and retain the hardware securing the rewind starter.
Remove the rewind starter and move it to the side.
To Next Page
Loading...
Need help?
General
